PRO-GRADE ADHESIVE (10.2 fl oz)

$14.00
Part Number
PL-E6100

PL-E6100 PRO-GRADE ADHESIVE

The PL-E6100 is a unique NON-SAG non-flammable industrial adhesive formulated to meet high-performance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. This NON-SAG formula will not drip or run and is highly recommended for use in applications requiring vertical hold. PL-E6100 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration.

Features:

  • 24 HOUR CURE
  • INTERIOR / EXTERIOR
  • PERMANENT
  • PAINTABLE

Directions:

  1. Surface should be clean, dry and free of dirt. For best results, lightly roughen surface before use.
  2. Trim end of nozzle. Puncture inner seal. Ideal application temperature range is 50 to 90°F (10 to 32°C). However, fully cured adhesive can withstand temperatures from -40 to 180°F (-40 to 82°C) intermittently.
  3. Apply directly to surfaces to be bonded or repaired.
  4. Allow 24 hours of curing. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
  5. For prolonged storage after opening, cover or plug the opening of the nozzle.
  6. Clean uncured adhesive with acetone or citrus based solvents. Cured material may be removed by cutting or scraping.