Polylok Standard 24" Riser Kit (4" Tall)

The Polylok 24" riser kit comes complete with everything needed to install a septic tank riser system in your application. This package gives you approximately 4" in height. Additional 24" Polylok risers can be purchased and stacked on to this kit.
Includes:

• Polylok 20"/24" Riser Adapter Ring (PN: 3009-AR)
• Polylok 24" x 2" Riser (PN: 3008-GR2)
• Polylok 24" Riser Cover rated at 500 lbs. (PN: 3008-RC)
• Polylok Adapter Ring Installation Anchor Kit (PN: 3009-KIT-NG)
• #10x1-1/2” stainless steel square drive screws

Optional 24"x12", 24"x6", 24"x3", and 24"x2" risers are available for this kit.

Optional 24" riser gaskets (PN: 3008-HR) are available for this kit.

Installation Instructions:

1. Locate adapter ring over access opening on top of tank
2. Using a 1/4" masonry bit, drill 8 holes 1-1/4" deep on top of tank
3. Clean under surface of adapter ring apply foam gasket or butyl
4. Position adapter ring over opening, using 1/4" anchors, tap anchors into drilled holes and tighten with wrench
5. Position appropriate riser and or cover and screw onto the adapter ring to provide a watertight connection

Note: These items should be installed by a professional septic tank installer or pumper.  These are not intended to be installed by a homeowner.